Rocket Auto-Fill Circuit
Rocket Auto-Fill Circuit. For machines manufactured before 2018 (up to S/N D1915). You might also need the 6-pin green connector. Cross-Refere...
View full detailsRocket Auto-Fill Circuit. For machines manufactured before 2018 (up to S/N D1915). You might also need the 6-pin green connector. Cross-Refere...
View full details1/4" BSP, 140mm. The auto-fill probes on Simonelli equipment are bent prior to installing into the side of the boiler, so be sure to keep your old ...
View full detailsDigital thermostat PID 110V body dimensions 61x29x52 mmframe dimensions 70x31 mm Cross-Reference: Part number Manufacturer 10200120 Expobar ...
View full details1/4" BSP, 80mm. The auto-fill probes on some equipment are bent prior to installing into the side of the boiler, so be sure to keep your old one so...
View full details1/4" female BSP fittings. Water inlet flow orifice measuring 1.15 mm - NSF approved. Some flow-meters have 1/8" fittings, so be sure you are orderi...
View full detailsFits all Gicar flowmeter bodies, though check your lid: the pin configuration may be different. It is recommended that you also replace the oring.
Expobar Auto-Fill Circuit. Gicar RL30/1E-2R/F 115V. Cross-Reference: Part number Manufacturer 60100106 Expobar 60100210 Expobar 9.1.4...
View full detailsConnector for Gicar flowmeters. The female voltage terminal slots are spaced at 9.5 mm from left to right and the center ground wire terminal slot ...
View full detailsRocket Auto-Fill Circuit. For machines manufactured after 2018 (from S/N D1915). You might also need the 6-pin green connector. Cross-Referenc...
View full detailsDoes not include o-ring. A good flowmeter lid should read 1.8- 2.2k ohms with a voltage meter.
This is the Gicar FMRT-F-F version, with a 1.15 mm diameter orifice (nozzle). G 1/4" female threads. Cross-references: Part number Manufacturer ...
View full details1/4" BSP, 100mm. The auto-fill probes on some equipment are bent prior to installing into the side of the boiler, so be sure to keep your old one s...
View full detailsDesigned specifically for, and only used in, the Oscar model. Gicar RL30/2S/3R 115V. Cross-Reference: Part number Manufacturer 9V8353 De V...
View full details1/8" BSP, 115mm. Cross-references: Part number Manufacturer CRP.24 Ascaso 400.020 Fast Ricambi 9.0.83.98G Gicar 1341802 LF 342000...
View full detailsNSF certified low pressure flowmeter with 7mm barbed outlet fitting. Cross-references: Part number Manufacturer 9.0.99.28G Gicar 5032820 L...
View full detailsThis is a special order item. Please allow 1 - 2 weeks (typically) for the item to be processed prior to shipping Gicar code 9.1.00.67G. Auto-fill ...
View full details1/4" female BSP fittings. Water inlet flow orifice measuring 1.5 mm - NSF approved. Cross-references: Part number Manufacturer C..834 Ascas...
View full detailsThis is a special order item. Please allow 1 - 2 weeks (typically) for the item to be processed prior to shipping Gicar code 9.1.19.18. Auto-fill l...
View full detailsThis is a special order item. Please allow 1 - 2 weeks (typically) for the item to be processed prior to shipping Gicar code 9.1.40.97G. Auto-fill ...
View full details