Oscar II Hydraulics

Bilt Oscar is an innovative descaling device for domestic and office espresso machines.  It passively removes calcium, magnesium and impurities fro...

Bilt Oscar is an innovative descaling device for domestic and office espresso machines.  It paasively removes calcium, magnesium and impurities fro...

Ulka Type EX5. 120V / 60 Hz, 41 W. This Ulka brand vibratory pump is used in many various home espresso machines and in some rare cases, commercial...

Ulka Type EP5. 120 V/60 Hz, 41 W. This Ulka brand vibratory pump is used in many home espresso machines (current model Rancilio Silvia) and in some...

Vibratory pump pulsor designed by Quickmill for the QM67 but can be used in any machine using a vibratory pump as long as there is space. Connects ...

8 mm outside diameter by 5 mm inside diameter. Sold in one meter (1 meter equals a little over 3 feet) sections.   Cross-references: Part numbe...

For hoses 8.8 - 9.3 mm    Cross-references: Part number Manufacturer 15056001  Astoria CMA 184320200 Gaggia 3449404  LF 170110 Ma...

Inversys ARS CP3A/ST5. 120 V/60 Hz, 55 W. This Invensys ARS brand vibratory pump is used in many home espresso machines and is more silent that Ulk...

Santoprene rubber, internal pump connection ø 6 mm, hose-end fitting ø 7.5 mm.   Cross-Reference: Part number Manufacturer 7303001  Bezze...

110/120V 50/60HZ 9W 1/4" x 1/4" Two-Way Parker Solenoid VE146YV - fittings ø 1/4"FF - max 7 barVITON seal - orifice ø 3 mmwith coil ZB09 9W 110/120...

1/8" M BSP x 6 OD 4 ID compression barb elbow fitting. Cross-Reference: Part number Manufacturer V..549 Ascaso 30400010  Expobar 134919...

90 degrees rubber vibratory pump support foot.

For hoses 7.8 - 8.3 mm    Cross-references: Part number Manufacturer 15056000 Astoria CMA 9824800009 DeLonghi 3449402 LF P1997 Prof...

Replaces the old plastic frame for rubber vibratory pump supports with two each rubber supports, screws, washers and self-locking nuts. ASSEMBLY (f...

Silicone o-ring 03056.  ring thickness 2.62 - internal ø 13.95 mm   Cross-Reference: Part number Manufacturer M..204 Ascaso 12609 Astoria C...

3L Water reservoir with float assembly for the Musica and Oscar II (not the original Oscar) models. 195x70x260 mm Cross-references:  Part number...

Neplax valve with Viton seat, 16.5 bar calibration, 1/8" M - 8 mm   Cross-references:  Part number Manufacturer S..845 Ascaso 25-162 Atel ...

Generic tee fitting, found mostly in the Nuova Simonelli and Victoria Arduino machines.   Cross-references: Part number Manufacturer 1349243 ...

Generic tee fitting 1/4" M x 1/4" F x 1/4" M BSP    Cross-references: Part number Manufacturer S..118 Ascaso 5135280 LF 07300091 Nuova S...

Use this fitting to install a 1/8" M BSP (male British Standard Pipe) fitting, doing away with the plastic barbed fittings used on vibratory pumps....

1/8"M x 1/8"F pump outlet fitting with a 0.7mm orifice used on the Oscar II, Oscar Mood and Talento models.   Cross-references:  Part number Ma...

Stainless steel M4 x 0.5 mm x 16mm length with hex socket.   Cross-references: Part number Manufacturer 7816004 Bezzera 10084087 Lavazza ...

Nuova Simonelli drain plug.   Cross-references: Part number Manufacturer 5055412 LF 05002230 Nuova Simonelli

The Nuova Simonelli Oscar II is a great machine, but it lacks a feature that most consider essential in this range: an adjustable OPV. Our kit will...