O-rings & Gaskets

Almost too many applications to list here, but used primarily with Brasilia water inlet and Rancilio and San Marco retention valves. ring thickness...

O-RING 0176 EPDM.  Thickness 3.53 mm - Internal ø 73.03 mm Used as the stainless steel element gasket for La Pavoni Europiccola, Professional and S...

There are many applications for this o-ring, most of them having to do with various  manufacturers steam wands. O-ring 0115 VitonThickness 2.62 Mm ...

O-RING 0062-20 EPDM.  ring thickness 2.0mm - internal ø6.2mm   Cross-references: Part number Manufacturer 1786394 LF C400003008  Rocket

O-RING 0080-20 Siliconering thickness 2.0mm - internal ø8.0mm   Cross-references: Part number Manufacturer I-2927 Ascaso 5332144800  DeLon...

Silicone o-ring 03056. Seals the outside of the reservoir water inlet nipple.   Cross-Reference: Part number Manufacturer M..204 Ascaso 126...

O-ring 02015 EPDM Thickness 1.78 Mm - Internal Ø 3.69 mm   Cross-references: Part number Manufacturer BF..85 Ascaso F.1728 Ascaso G..334 As...

A set of six (6) o-rings for use with the Flair 58 or 58x only, includes: One (1) o-ring for the brew cylinder One (1) o-ring for the stem Two (2)...

Red Silicone R5 O-Ring ring thickness 1.9 mm - internal ø 5.7 mm Cross-references: Part number Manufacturer R..469 Ascaso 25-106 Atel 11...

For the new Simonelli steam wand and hot water pipe nut to valve Thickness 2.00mm - Internal Ø 16mm   Cross-references: Part number Manufacture...

02300 EPDM rubber, this is installed underneath the group bell.

Not only a sight glass o-ring: where other manufactures use copper or paper seals, Nuova Simonelli use this o-ring to seal some metal fittings on t...

2.26mm thick x 12.8mm internal diameter - O3050 EPDM   Cross-references: Part number Manufacturer MZ.410 Ascaso P2042.5 ECM 3060608 ...

There are now two sizes of spouts due to a revision in the cut at the bottom of the portafilter. Some work best with the small o-ring, and others w...

1.00mm thick with 4.50mm internal diameter   This is the o-ring between the steam tip and the steam wand on the Gaggia Classic Pro.

O-RING GASKET M 0050-20 VITON La Marzocco part number H.1.005

O-ring 04150 Viton ring thickness 3.53 mm - internal ø 37.69 mm   Cross-Reference: Part number Manufacturer 5034986 LF F.2.014 Marzocco

A set of five (6) replacement o-rings for use with the standard brew head and accessories. This set is not compatible with the SS Piston.  Included...

Set of o-rings for rebuilding the GS3 MP group assembly.  This kit includes new Kalrez shaft O rings (non-conical), which last 4 times longer than ...

O-ring 02093 EPDMring thickness 1.78 mm - internal ø 23.52 mm   Cross-references: Part number Manufacturer F..440 Ascaso 15-094 Atel 11-138...

There are now two sizes of spouts due to a revision in the cut at the bottom of the portafilter. Some work best with the small o-ring, and others w...

O-ring ORM 0310-40 Silicone Thickness 4.00 mm - ø internal 31.00 mm   Cross-references: Part number Manufacturer 1786393 LF A449904547 Rocket

Used primarily as an o-ring for the La Cimbali, Faema, Grimac and VFA steam wands.   Cross-references: Part number Manufacturer C..187 Ascaso ...

Fits models CBS-2021eG, CBS-2021eP, CBS-2031e, CBS-2031ee, CBS-2031s, CBS-2032e, CBS-2032ee, CBS-2032s, CBS-2041e, CBS-2041ee, CBS-2042e, CBS-2042e...