Newest Products

3/8" BSP female threads on to the portafilter body. Fits most models/makes. These can be challenging for some to install. Many times the thickness ...

3/8" female threads on to the bottom of the portafilter body. This is the most common version used today, but can be challenging for some to instal...

19 x 13.5 x 1.5 mm - For the 1/4" group head, drain cup and boiler fittings, as well as pretty much all of the other 1/4" fittings on Marzocco or...

Uses 1/4" copper gasket.   Cross-references: Part number Manufacturer MZ..24  Ascaso 4525686  Astoria CMA 3510410  BFC 520.163  Fast...

This is a special order item. Please allow 1 - 2 weeks (typically) for the item to be processed prior to shipping. These wear out eventually, causi...

Bi-metal contact thermostat with manual reset.  135°C/275°F 16A 250V We recommend the use of thermal paste (or “grease”) to aid heat transfer betwe...

For all GS3, GB5, Linea, FB-70, FB-80 and Strada models. OR 03300 (GUARNIZIONE OR 8-2-151),  2.62 thick x 75.87 mm internal diameter. Cross-referen...

For GB5, Linea, FB-70, FB-80 and GS3 models 87 x 81 x 0.5mm Cross-references: Part number Manufacturer MZ...6  Ascaso MZ.121  Ascaso 5...

You will need a special tool to get to this o-ring, as it is above the diffuser. 3.53mm thick x 20.22mm inside diameter - 04081 EPDM. Cross-referen...

This gasket measures 72 x 55 x 6 mm and fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thinnest version with no bevel, used on newe...

This gasket fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thickest version with a bevel, used on older machines with extensive wea...

This gasket fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thinnest version with a bevel, used on newer machines with no wear to mo...

This gasket measures 72 x 55 x 7mm and fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thickest version with no bevel, used on newer...

M8x55mm stainless steel hex bolt Cross-references: Part number Manufacturer MZ...3  Ascaso 560.417  Fast Ricambi 11878  Iberital 15...

0.6 mm ruby orifice. 20 x 4 mm.  La Marzocco part number F.2.003 This is the 'older', long version, NOT for use with the Linea PB. A shorter vers...

10 x 6 x 1 mm copper washer.  This washer is used for both the bleed screws on the groups as well as the sight glass on La Marzocco, on the grou...

73 x 59 x 0.8mm. Paper shim for increasing the profile height of a group gasket in cases where portafilter wear causes the portafilter to engage in...

New version shower screen with La Marzocco logo etched in it. A more rigid screen than the original, the dimensions are 57.5 mm in circumference an...

Does not include o-ring. A good flowmeter lid should read 1.8- 2.2k ohms with a voltage meter.

PTFE plastic with two embedded magnets.

O-ring 02112 Viton   Cross-references: Part number Manufacturer V..502 Ascaso 12315  Astoria CMA 7496020  Bezzera 87.00123  Carimali...

Thicker than the "standard" 1/4" lock nuts.

This three-way solenoid valve assembly is used in La Marzocco equipment as the group head water distribution solenoid. For this application they ar...

This is the Gicar FMRT-F-F version, with a 1.15 mm diameter orifice (nozzle). G 1/4" female threads. Cross-references: Part number Manufacturer ...