Newest Products

La Marzocco 14 gram double portafilter basket. Accepts a 57mm tamper piston best. Equivalent to Marzocco L116/A

New stainless steel "Advanced" 7 gram single portafilter basket NOT suitable for the Swift grinders. Accepts a 58 mm or smaller tamper.

Thicker, 1.2 mm diameter. Used to secure the portafilter baskets into the body. Better suited for manufactures such as Astoria and Gaggia, where th...

Take your coffee game to the next level with this high quality filter basket.  The electro polished finished combined with an engineered perforatio...

Take your coffee game to the next level with this high quality filter basket.  The electro polished finished combined with an engineered perforatio...

Take your coffee game to the next level with this high quality filter basket.  The electro polished finished combined with an engineered perforatio...

3/8" BSP female threads on to the portafilter body. Fits most models/makes. These can be challenging for some to install. Many times the thickness ...

3/8" female threads on to the bottom of the portafilter body. This is the most common version used today, but can be challenging for some to instal...

19 x 13.5 x 1.5 mm - For the 1/4" group head, drain cup and boiler fittings, as well as pretty much all of the other 1/4" fittings on Marzocco or...

Uses 1/4" copper gasket.   Cross-references: Part number Manufacturer MZ..24  Ascaso 4525686  Astoria CMA 3510410  BFC 520.163  Fast...

Bi-metal contact thermostat with manual reset.  135°C/275°F 16A 250V We recommend the use of thermal paste (or “grease”) to aid heat transfer betwe...

For all GS3, GB5, Linea, FB-70, FB-80 and Strada models. OR 03300 (GUARNIZIONE OR 8-2-151),  2.62 thick x 75.87 mm internal diameter. Cross-referen...

For GB5, Linea, FB-70, FB-80 and GS3 models 87 x 81 x 0.5mm Cross-references: Part number Manufacturer MZ...6  Ascaso MZ.121  Ascaso 5...

You will need a special tool to get to this o-ring, as it is above the diffuser. 3.53mm thick x 20.22mm inside diameter - 04081 EPDM. Cross-referen...

This gasket measures 72 x 55 x 6 mm and fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thinnest version with no bevel, used on newe...

This gasket fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thickest version with a bevel, used on older machines with extensive wea...

This gasket fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thinnest version with a bevel, used on newer machines with no wear to mo...

This gasket measures 72 x 55 x 7mm and fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thickest version with no bevel, used on newer...

M8x55mm stainless steel hex bolt Cross-references: Part number Manufacturer MZ...3  Ascaso 560.417  Fast Ricambi 11878  Iberital 15...

0.6 mm ruby orifice. 20 x 4 mm.  La Marzocco part number F.2.003 This is the 'older', long version, NOT for use with the Linea PB. A shorter vers...

10 x 6 x 1 mm copper washer.  This washer is used for both the bleed screws on the groups as well as the sight glass on La Marzocco, on the grou...

73 x 59 x 0.8mm. Paper shim for increasing the profile height of a group gasket in cases where portafilter wear causes the portafilter to engage in...

New version shower screen with La Marzocco logo etched in it. A more rigid screen than the original, the dimensions are 57.5 mm in circumference an...

Does not include o-ring. A good flowmeter lid should read 1.8- 2.2k ohms with a voltage meter.