Newest Products

This is a special order item. Please allow 2 - 3 weeks (typically) for the item to be processed prior to shipping. La Marzocco GS3 Steam Valve Elbo...

Black matte finish plastic. Marzocco B.1.005

Originally for the 220V non "cool touch" version. Also found in the Strada model. La Marzocco part number F.4.007

2.26mm thick x 12.8mm internal diameter - O3050 EPDM   Cross-references: Part number Manufacturer MZ.410 Ascaso P2042.5 ECM 3060608 ...

For 10 mm steam wands. 80mm long. Two are used on each wand in some cases. La Marzocco part number F.2.017

Threads into valve knob, and then the little white symbols for steam or water snap into it. Cross-references: Part number Manufacturer 111.27...

Left or right side, moves only forward and back. Total length: 10"Top Elbow to Nozzle: 7.5"Lower Elbow to Nozzle: 4.5"   Cross-references: Part...

One per purchase. Cross-references: Part number Manufacturer F..328 Ascaso F..474 Ascaso 0540080  BFC 8F9 De Vecchi Giuseppe  30370050...

White plastic, presses into bezel. Black version also available   Cross-references: Part number Manufacturer F..472 Ascaso 8F428 De Vecchi ...

Steam Wand Articulation Spring.  26 x 14 mm Cross-references: Part number Manufacturer F..346 Ascaso 8F266 De Vecchi Giuseppe  4731109279 ...

Coarse thread with extended body   Cross-references: Part number Manufacturer F..475 Ascaso 0540040 BFC 8F328 De Vecchi Giuseppe  3037...

Widely used in many manufactures steam and water valves. This guides the spring inside the valves, pressing against the o-rings to seal off the f...

Silicone rubber, 12 x 5.8 mm. Used in many manufactures steam and water valves Cross-references: Part number Manufacturer EX..219 Ascaso F...

Steam and water valve body used by various manufacturer as per table below.   Cross-references: Part number Manufacturer F..478 Ascaso F.....

22 x 16.5 x 2.2 mm.

Circlip E-16, C60 - internal ø 14.7 mm - thickness 1 mm, UNI 7435 - DIN 471. 

La Marzocco 2mm Pitch Steam Valve Re-build Kit. La Marzocco part number L165/K

Fits all models of La Marzocco. 1/8" British Standard Pipe thread - fine. 1.2 mm holes. A standard on the GS/3 machine, this steam tip can be fitte...

One per purchase

26x16.5x1 Mm   De Vecchi Giuseppe  8F383  Faema 4051052071 LF 1528130 La Marzocco  L165/2  Nuova Ricambi  552071

Stainless steel cotter pin. ø 2 x 12mm, measured from the end of the shortest portion to the first bend   Cross-references: Part number Man...

OR 0106, also used as the ECM steam wand tip o-ring, the Grimac water inlet activating rod and Faema E-66/P-6 valve drawer o-ring.

From the solenoid valve to the hot water spigot. Cross-references: Part number Manufacturer BF.562 Ascaso 07202.0.00.04 Brasilia 07202.0.1...

This it the part that the rubber seat seal presses against, closing off the steam.  La Marzocco part number F.3.007