Linea PB Group Head

Uses 1/4" copper gasket.   Cross-references: Part number Manufacturer MZ..24  Ascaso 4525686  Astoria CMA 3510410  BFC 520.163  Fast...

Or, "1/4PLUG STEAM BOILER CROSS". Basically, a plug for a 1/4" fitting that has a hole in it.

This three-way solenoid valve assembly is used in La Marzocco equipment as the group head water distribution solenoid. For this application they ar...

This three-way solenoid valve assembly is used in La Marzocco equipment as the group head water distribution solenoid.     Cross-references: Par...

6.5 mm hole for screw. Fits La Marzocco, Slayer, Synesso and (old) Carimali. Cross-references: Part number Manufacturer MZ.275 Ascaso 8MZ...

72.2 x 58.4 x 1mm. Viton rubber shim for increasing the profile height of a group gasket in cases where portafilter wear causes the portafilter to ...

73 x 59 x 0.8mm. Paper shim for increasing the profile height of a group gasket in cases where portafilter wear causes the portafilter to engage in...

73.5 x 59 x 1mm. EPDM shim for increasing the profile height of a group gasket in cases where portafilter wear causes the portafilter to engage in ...

New improved water distribution is gained with the Coffee Sensor custom La Marzocco Diffuser Screw due to the six hole design. It also features a l...

16A 250V Manual reset thermostat 130°C/266°F (bipolar) (CE).   We recommend the use of thermal paste (or “grease”) to aid heat transfer between the...

19 x 13.5 x 1.5 mm - For the 1/4" group head, drain cup and boiler fittings, as well as pretty much all of the other 1/4" fittings on Marzocco or...

E&B Lab (by IMS) precision shower screen features a nanoquartz coating  that improves water distribution, reduces corrosion and increases chemi...

PTFE plastic with two embedded magnets.   Cross-references: Part number Manufacturer 13505 Astoria 15505 Astoria 4831091782 Faema 6.9.23...

Connector for Gicar flowmeters. The female voltage terminal slots are spaced at 9.5 mm from left to right and the center ground wire terminal slot ...

This is the Gicar FMRT-F-F version, with a 1.15 mm diameter orifice (nozzle). G 1/4" female threads. Cross-references: Part number Manufacturer ...

Does not include o-ring. A good flowmeter lid should read 1.8- 2.2k ohms with a voltage meter.

O-ring 02112 Viton   Cross-references: Part number Manufacturer V..502 Ascaso 12315  Astoria CMA 7496020  Bezzera 87.00123  Carimali...

IMS Competition Series shower screen provide even water distribution and a better, more consistent extraction. The integrated 200µm membrane is cre...

IMS Nanotech Series precision shower screen features a nanoquartz coating  that improves water distribution, reduces corrosion and increases chemic...

Thicker than the "standard" 1/4" lock nuts.

This gasket fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thinnest version with a bevel, used on newer machines with no wear to mo...

This gasket measures 72 x 55 x 6 mm and fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thinnest version with no bevel, used on newe...

This gasket fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thickest version with a bevel, used on older machines with extensive wea...

This gasket measures 72 x 55 x 7mm and fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thickest version with no bevel, used on newer...