GS3 Group Head

6.5 mm hole for screw. Fits La Marzocco, Slayer, Synesso and (old) Carimali. Cross-references: Part number Manufacturer MZ.275 Ascaso 8MZ...

73 x 59 x 0.8mm. Paper shim for increasing the profile height of a group gasket in cases where portafilter wear causes the portafilter to engage in...

73.5 x 59 x 1mm. EPDM shim for increasing the profile height of a group gasket in cases where portafilter wear causes the portafilter to engage in ...

New improved water distribution is gained with the Coffee Sensor custom La Marzocco Diffuser Screw due to the six hole design. It also features a l...

16A 250V Manual reset thermostat 130°C/266°F (bipolar) (CE).   We recommend the use of thermal paste (or “grease”) to aid heat transfer between the...

19 x 13.5 x 1.5 mm - For the 1/4" group head, drain cup and boiler fittings, as well as pretty much all of the other 1/4" fittings on Marzocco or...

E&B Lab (by IMS) precision shower screen features a nanoquartz coating  that improves water distribution, reduces corrosion and increases chemi...

PTFE plastic with two embedded magnets.

Connector for Gicar flowmeters. The female voltage terminal slots are spaced at 9.5 mm from left to right and the center ground wire terminal slot ...

Does not include o-ring. A good flowmeter lid should read 1.8- 2.2k ohms with a voltage meter.

O-ring 02112 Viton   Cross-references: Part number Manufacturer V..502 Ascaso 12315  Astoria CMA 7496020  Bezzera 87.00123  Carimali...

IMS Competition Series shower screen provide even water distribution and a better, more consistent extraction. The integrated 200µm membrane is cre...

IMS Nanotech Series precision shower screen features a nanoquartz coating  that improves water distribution, reduces corrosion and increases chemic...

This gasket fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thinnest version with a bevel, used on newer machines with no wear to mo...

This gasket measures 72 x 55 x 6 mm and fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thinnest version with no bevel, used on newe...

This gasket fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thickest version with a bevel, used on older machines with extensive wea...

This gasket measures 72 x 55 x 7mm and fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thickest version with no bevel, used on newer...

A more rigid version of the La Marzocco screen that gives better water distribution and better extractions, especially with the larger doses typica...

M8x55mm stainless steel hex bolt Cross-references: Part number Manufacturer MZ...3  Ascaso 560.417  Fast Ricambi 11878  Iberital 15...

6 x 16 mm stainless steel with holes. This acts as the diffusor (vite di diffusore) in the La Marzocco group heads. Cross-references: Part n...

New version shower screen with La Marzocco logo etched in it. A more rigid screen than the original, the dimensions are 57.5 mm in circumference an...

La Marzocco GS3 Group Cover (F.1.012)

Seals the internal group siphon tube to the group head. ORING 02062 DIA INT 15,6 SPESS.

For the Marzocco paddle group, this is the large lower o-ring, three per group. Three are also used for the GS3 drain connection. Ring Thickness 2...