Grey Thermal Paste (0.5g)
Graphite thermal grease for use with bi-metal contact thermostats. Thermal conductivity 1.93W/m-k Breakdown 10kv voltage Low thermal impedance Sta...
View full detailsGraphite thermal grease for use with bi-metal contact thermostats. Thermal conductivity 1.93W/m-k Breakdown 10kv voltage Low thermal impedance Sta...
View full detailsPRESSURE SWITCH XP110 125 0.5-1.2 BAR 1/4". Connection ø 1/4"M - 15A 125/250V, preset 1 bar. It should be noted that these pressurestats were not d...
View full detailsPTFE Gasket for 1/4" Fittings 18 x 13 x 2mm Cross-references: Part number Manufacturer C..377 Ascaso 0510190 BFC A1200166 Fiorenzato ...
View full details19 x 13.5 x 1.5 mm - For the 1/4" group head, drain cup and boiler fittings, as well as pretty much all of the other 1/4" fittings on Marzocco or...
View full detailsComes with factory certification that the valve will open in the event of a boiler over-pressurizing. Set to open at 1.8 bar. This is the most comm...
View full details53 x 43 x 3mm. Fits any 1-1/4" flange threaded element. Cross-references: Part number Manufacturer CA..20 Ascaso 74.00011 Carimali 8G98...
View full details3/8" x 3/8" MF BSP ball valve The handle on the valve is sometimes black and sometimes red, but the parts are the same. Cross-references: Part n...
View full detailsPRESSURE SWITCH XP110 125 1.0-2.5 BAR 1/4". Connection ø 1/4"M - 16A 125/250V, preset 1.5 bar. It should be noted that these pressurestats were not...
View full detailsBi-metal contact thermostat with manual reset. 135°C/275°F 16A 250V We recommend the use of thermal paste (or “grease”) to aid heat transfer betwe...
View full details1/4" BSP, 140mm. The auto-fill probes on Simonelli equipment are bent prior to installing into the side of the boiler, so be sure to keep your old ...
View full detailsThermostat bracket that will fit most thermostats
OEM Marzocco product. 3/8" BSP, stainless steel body, Viton® seal, 1.8 Bar, certified. La Marzocco part number B.2.024 (Old L180)
"Boosted" heating element for the three group machines. 50 cm immersed length. 37 mm socket would be best, but a 36 mm fits barely. Immersed Leng...
View full detailsImmersed Length 600 mm - 2 PolesConnection Ø 1"1/4For 3 Groups Coffee Machines. Does not include gasket. Cross-references: Part number Manuf...
View full detailsUses 1/4" copper gasket. Cross-references: Part number Manufacturer MZ..24 Ascaso 4525686 Astoria CMA 3510410 BFC 520.163 Fast...
View full detailsFor the Strada, GB-5, FB-80, GS3 and Linea PB brew boilers. Marzocco #E.1.005.
These are shipped straight and unbent: gently bend with a pipe bender to fit. La Marzocco part number TL09
15 x 10 x 1mm Copper Washer Cross-references: Part number Manufacturer R..129 Ascaso 529.373 Fast Ricambi R222 Grimac 1426 Iber...
View full detailsImmersed Length 420 Mm - 2 PolesConnection Ø 1"1/4For 2-4 Groups Coffee Machine. Does NOT include the heating element gasket. Cross-references: ...
View full details16A 250V Manual reset thermostat 130°C/266°F (bipolar) (CE). We recommend the use of thermal paste (or “grease”) to aid heat transfer between the...
View full detailsImmersed Length 290 Mm - 2 PolesConnection Ø 1"1/4For Coffee Machines With 2 Groups. Does not include gasket. Cross-references: Part number ...
View full detailsM8 x 20mm Bolt. 1.25 metric thread. Cross-references: Part number Manufacturer AS..64 Ascaso AS..65 Ascaso R..117 Ascaso SP.165 Ascas...
View full details