Classe 7 Boiler

Graphite thermal grease for use with bi-metal contact thermostats. Thermal conductivity 1.93W/m-k Breakdown 10kv voltage Low thermal impedance Sta...

21 x 16.8 x 2 mm, for 3/8" fittings. Used in most cases to seal the steam and water wands and pipe fixing nuts to their valves, but has other appli...

Comes with factory certification that the valve will open in the event of a boiler over-pressurizing. Set to open at 1.8 bar. This is the most comm...

For Rancilio (and Promac/Laranzato) ONLY. Larger than the more common 1/4" valve. Allows air to escape as the the boiler heats up. OUTSIDE diameter...

3/8" x 3/8" MM BSP ball valve The handle on the valve is sometimes black and sometimes red, but the parts are the same. Cross-references: Part nu...

PTFE gasket 65 x 46 x 1.5 mm.   Cross-references: Part number Manufacturer R.462 Ascaso 1186455  LF 700305/T Nuova Ricambi 36930012 ...

3/8" thread, weighted for balance. Note: An additional gasket is required. Cross-references:  Part number Manufacturer R..415 Ascaso 8R445  D...

For the Millennium, Epoca and Classe models.  1.9bar.   Cross-references: Part number Manufacturer 65000110 Expobar 1515025 LF 10060514 ...

1/8" BSP, 115mm.   Cross-references: Part number Manufacturer CRP.24  Ascaso 400.020  Fast Ricambi 9.0.83.98G  Gicar 1341802  LF 342000...

Internal teeth, 26 mm x 18 mm Cross-References: Part number Manufacturer 1348829 LF 37431600 Promac 37431600 Rancilio

175 x 123 x 2 mm. Holes measure 10.5 mm inside diameter, and are spaced at 61 mm on center.   Cross-references: Part number Manufacturer R.....

3/8" British Standard Pipe x 5 mm, uses a 19 mm wrench.   Cross-references: Part number Manufacturer 4038136012  Faema L183/1  La Marzocco ...

Rancilio heating element cover Rancilio part #38123665  

M8 x 20mm Bolt.  1.25 metric thread. Cross-references: Part number Manufacturer AS..64 Ascaso AS..65 Ascaso R..117 Ascaso SP.165 Ascas...

10 x 1mm. Closes up the hole from the old version high-limit thermostat that's no longer available.   Cross-references: Part number Manufactur...

3/8 cap for the top of the heat exchangers  

This is a special order item. Please allow 2 - 3 weeks for the item to be processed prior to shipping.   Round, as opposed to the newer "wedge" s...