Appia II Hydraulics

Fits all Gicar flowmeter bodies, though check your lid: the pin configuration may be different.  It is recommended that you also replace the oring.

Generic tee fitting 3/8" M x 3/8" F x 3/8" F BSP   Cross-references: Part number Manufacturer V.2278 Ascaso 20-119 Atel 1349241 LF 073...

Not only a sight glass o-ring: where other manufactures use copper or paper seals, Nuova Simonelli use this o-ring to seal some metal fittings on t...

Connector for Gicar flowmeters. The female voltage terminal slots are spaced at 9.5 mm from left to right and the center ground wire terminal slot ...

Generic British Standard Pipe thread fitting, 23 mm overall length   Cross-references: Part number Manufacturer G...80 Ascaso AMD.97 Ascaso ...

This is the smaller one for the expansion valves, not for the bottom of the water reservoir.   Cross-references: Part number Manufacturer S...

Neplax valve with Viton seat, 16.5 bar calibration, 1/8" M - 8 mm   Cross-references:  Part number Manufacturer S..845 Ascaso 25-162 Atel ...

Generic 3/8" M x 3/8" M BSP Elbow Fitting.  Sometimes brass and sometimes nickel plated.   Cross-references: Part number Manufacturer V..906 ...

Generic tee fitting 1/4" M x 1/4" M x 1/4" F BSP   Cross-references: Part number Manufacturer S..160 Ascaso 04057016 Bianchi 22.01022 Carim...

Nuova Simonelli expansion valve gasket. Silicone Rubber, 12 x 4.5 x 4 mm.   Cross-references:  Part number Manufacturer S.51 Ascaso 1186487...

Nuova Simonelli sight glass 12 X 112mm   Cross-references: Part number Manufacturer S..106 Ascaso 26-080 Atel 1520518 LF 09000009 Nuo...

Generic tee fitting, found mostly in the Nuova Simonelli and Victoria Arduino machines.   Cross-references: Part number Manufacturer V.1864 A...

Two 1/8" vertically mounted fittings. 60mm outside diameter. 0 - 2.5 x 0 - 15 bar. Nuova Simonelli part number 09100003

Generic BSP thread nut for 1/8" fittings.   Cross-references: Part number Manufacturer V.1598 Ascaso 25395 Astoria CMA 10066591 Atel 134...

Generic 1/4" M x 1/4" M BSP Elbow Fitting   Cross-references: Part number Manufacturer S..267 Ascaso 23203 Astoria CMA 10066142 Atel 506...

 1/4" BSP thin fixing nut Cross-references: Part number Manufacturer S..268 Ascaso 30100010 Expobar 1528171 LF 00300002 Nuova Simonel...

Plastic sleeve for the safety valve.

Nuova Simonelli complete sight glass assembly for Aurelia, Aurelia II, Appia and Appia 2   Cross-references: Part number Manufacturer S..763...

There are many names for this part, but a brief description should suffice: this valve allows air to escape the boiler as the water heats up, hissi...

3/8" British Standard Pipe x 4 mm, uses a 20 mm wrench.   Cross-references: Part number Manufacturer S..429 Ascaso 5082588 LF 00300013 Nuo...

Fits any make of clamp flange rotary vane water pump. Secures pump to motor 10mm width for flange coupling=fits pump flanges with a maximum 5mm thi...

1/4" female x 1/4" male BSP   Cross-references: Part number Manufacturer 3526699 LF 09000018 Nuova Simonelli

These are new a design for Nuova Simonelli equipment only. It comes as a kit for retro-fitting most all (commercial) models new and old, but does n...

3/8" British Standard Pipe, 21 x 6mm   Cross-references: Part number Manufacturer F..321 Ascaso F.1805 Ascaso SAE280 Ascaso S...80 ...