Appia II Boiler

Graphite thermal grease for use with bi-metal contact thermostats. Thermal conductivity 1.93W/m-k Breakdown 10kv voltage Low thermal impedance Sta...

Comes with factory certification that the valve will open in the event of a boiler over-pressurizing. Set to open at 1.8 bar. This is the most comm...

Commercial pressurestat for 110~120/220~240V equipment, #P302-6. This is the part that regulates your boiler heating via a diaphragm that expands a...

Bi-metal contact thermostat with manual reset.  135°C/275°F 16A 250V We recommend the use of thermal paste (or “grease”) to aid heat transfer betwe...

1/4" BSP, 140mm. The auto-fill probes on Simonelli equipment are bent prior to installing into the side of the boiler, so be sure to keep your old ...

Calibration pressure 1.8 bar, steam outlet flow rate 77 Kg/h, viton seal, operating temperature -20/+200°C, CE/PED certified valve. These are new a...

67 x 55 x 3 mm   Cross-references: Part number Manufacturer S..221 Ascaso 1186409 LF 02060015 Nuova Simonelli 02060015 Victoria Arduino

Red Silicone R5 O-Ring ring thickness 1.9 mm - internal ø 5.7 mm Cross-references: Part number Manufacturer R..469 Ascaso 25-106 Atel 11...

Thermostat bracket that will fit most thermostats

Paper composite 17 x 13 x 2 mm

Generic tee fitting 3/8" M x 3/8" F x 3/8" F BSP   Cross-references: Part number Manufacturer V.2278 Ascaso 20-119 Atel 1349241 LF 073...

Generic 1/4" M x 1/4" M BSP Elbow Fitting   Cross-references: Part number Manufacturer S..267 Ascaso 23203 Astoria CMA 10066142 Atel 506...

Black plastic element wiring cover for the Aurelia, Aurelia II, Appia and Appia II. 53x53x40 mm   Cross-references: Part number Manufacturer ...

Plastic sleeve for the safety valve.

For two group machines. Nuova Simonelli now produce all of their two group equipment with this wattage element installed, so it has become the "nor...

1/2" BSP Fixing Nut.   25 x 6mm   Cross-references: Part number Manufacturer F..850 Ascaso 22.01170 Carimali 30370140  Expobar 40340413...

This is a special order item.  Please allow 1 - 2 weeks (typically) for the item to be processed prior to shipping   4 x 6 x 180mm. Needs to be fla...

For three and four group machines. Nuova Simonelli now produce all of their three and four group equipment with this wattage element installed, so ...

3/8" F BSP end cap nut nut 20 mm - height 15 mm - hole 11 mm   Cross-references: Part number Manufacturer S..465 Ascaso 5091035 LF 0730...

Self-tapping stainless steel screw 2.9 x 4.5mm   Cross-references: Part number Manufacturer S..467 Ascaso 5034932 LF 00000048 Nuova Simon...

M8 x 20mm stainless steel   Cross-references: Part number Manufacturer S..870 Ascaso 00126035 Elektra 25093320 Expobar 3528088 LF 00000...