Appia Hydraulics

The Dow Corning Molykote 111 silicone lubricant is one of the best lubricant on the market.  It is NSF certified and perfect for all espresso machi...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

8 mm outside diameter by 5 mm inside diameter. Sold in one meter (1 meter equals a little over 3 feet) sections.   Cross-references: Part numbe...

So are you having trouble finding a fitting to connect your European espresso machine to American plumbing? This is THE part you will need to insta...

So are you having trouble finding a fitting to connect your European espresso machine to American plumbing? This is THE part you will need to insta...

Also called siphon, anti-siphon or vacuum breaker valve. This valve allows air to escape the boiler as the water heats up, hissing and then closing...

3/8" Female BSP x 3/8" Female BSP with elbow.  Operating pressure: 10 barMax temperature: 90 CDiameter: 8mm (ID) x 12mm (OD)m

There are many names for this part, but a brief description should suffice: this valve allows air to escape the boiler as the water heats up, hissi...

The Dow Corning Molykote 111 silicone lubricant is one of the best lubricant on the market.  It is NSF certified and perfect for all espresso machi...

3/8" Female British Standard Pipe, with two conical connection. Operating pressure: 10 barMax temperature: 90 CDiameter: 8mm (ID) x 12mm (OD)

Comes with factory certification that the valve will open in the event of a boiler over-pressurizing. Set to open at 1.8 bar. This is the most comm...

***PRICE PER FOOT*** 20 mm inside diameter. Order 5 quantity for 5 feet minimum or more

O-ring 02112 Viton   Cross-references: Part number Manufacturer V..502 Ascaso 12315  Astoria CMA 7496020  Bezzera 87.00123  Carimali...

3/8" x 3/8" MF BSP ball valve The handle on the valve is sometimes black and sometimes red, but the parts are the same. Cross-references: Part n...

Low profile adapter for threading the 1/4" anti-vacuum valve into the 3/8" Tee fitting. 16 mm tall. Equivalent for Simonelli part number 07300099

Calibration pressure 1.8 bar, steam outlet flow rate 77 Kg/h, viton seal, operating temperature -20/+200°C, CE/PED certified valve. These are new a...

PTFE plastic with two embedded magnets.

3/8" M x 1/4" M BSP  Fitting   Cross-references: Part number Manufacturer AMD.98 Ascaso V..313 Ascaso 25716 Astoria CMA 25716002 Astor...

Red Silicone R5 O-Ring ring thickness 1.9 mm - internal ø 5.7 mm Cross-references: Part number Manufacturer R..469 Ascaso 25-106 Atel 11...

Fits all Gicar flowmeter bodies, though check your lid: the pin configuration may be different.  It is recommended that you also replace the oring.

Generic tee fitting 3/8" M x 3/8" F x 3/8" F BSP   Cross-references: Part number Manufacturer V.2278 Ascaso 20-119 Atel 1349241 LF 073...

Connector for Gicar flowmeters. The female voltage terminal slots are spaced at 9.5 mm from left to right and the center ground wire terminal slot ...

Not only a sight glass o-ring: where other manufactures use copper or paper seals, Nuova Simonelli use this o-ring to seal some metal fittings on t...